 |
English Dovetail Saw
This premium brass back saw has a very fine twenty teeth per inch blade which is stiffened by a heavy brass back. The pistol grip beechwood handle fits comfortably in the hand and is secured to the blade with three solid brass cap screws. The crosscut teeth work well both across and with the grain making this saw perfect for dovetails and other small joints. 8″ blade length, 2 1/4″ depth of cut. |
| 20200 | 8″ x 20 tpi English Dovetail Saw | $79.95 |
| 645-1000 | 8″ x 19 tpi English Gents Saw | $29.95 |
|
|
These Japanese back saws cut on the pull stroke which puts the blade in tension during the cut. This feature allows the manufacturer to use a thin, very sharp fine tooth blade with minimum set. The results are extraordinary. The ease and accuracy of cut are unparalleled by even the finest Western style saw. Dozuki saws excel at very fine cutting such as joinery and accurate trim work. Use one and you will wonder how you worked without it. The Large Razor Saw has a replaceable 18 tpi x 1 3/4″ wide x 9 1/2″ long blade with an overall length of 21″. |
| 720-1550 | Razor Saw | $59.75 | |
| 720-1555 | Replacement Blade | $25.95 |
 |
Razor Saw
This saw shares the same basic design elements with traditional Japanese saws. Instead of a wrapped handle, this model features a comfortably contoured plastic grip. The 17 teeth per inch blade is replaceable and has a 7” cutting edge. The overall length of the saw is 18”. An affordable saw that is excellent for fine, precise cuts in hard and soft woods. |
||||||||
|
|||||||||
 |
Ryoba Saw
This saw is perfect for cross cutting or ripping. The blade has seventeen teeth per inch on the crosscut side and 6 teeth per inch on the rip side. Overall length is 15 1/2″ with a 7″ cutting edge. Instead of a wrapped handle, this model features a comfortably contoured plastic grip. |
| 770-3600 | Ryoba Saw | $39.50 | Add to Cart |
| 770-3610 | Replacement Blade | $26.50 | Add to Cart |
| Veneer Saw
The cutting edge of this tool is a combination of saw teeth and a knife edge. This unique cutting edge resists following the grain and makes cross grain cuts neat and tear-free. The handle is off-set to provide hand clearance. 2″ wide by 3″ long blade. 8 1/2″ long. Note: Honing a bevel on the outside of the cutting edge is required. The bevel should be on the same side of the blade as the cast metal brace. The other side is honed flat so it can follow the straight edge accurately and leave a square cut on the veneer’s edge. Made by Crown Tools in Sheffield, England. |
 |
| 20195 | Veneer Saw | $28.95 |