Six Piece Woodcarvers Starter Set

Quality tools in this price range are hard to find. Too often inexpensive tools are stamped from inferior steel and will not hold an edge.  We are pleased to offer this six piece set of hand-forged, hand-ground tools. These high carbon steel carvers will exceed your expectations for affordable, small tools made for the beginner or detail carver. Set includes: 3/8″ curved gouge, 3/8″ straight chisel, 3/8″ skew chisel, 1/4″ curved gouge, 5/16″ deep gouge and 1/4″ V tool.
Overall length 6 1/2″. These tools are sharp but some honing may be required.
Description Stock Number Price Purchase

Starter Set

K1 $45.00

Add to Cart


Two Cherries Boxed Chisel Set

Two Cherries Chisels are made of the highest quality German steel. The blades are skillfully heat-treated using an immersion bath method to achieve a hardness of Rc 61.  This means that sharpening may take a few extra minutes, but they will hold an edge significantly longer than almost any other chisel made.  After heat treating, the blades are polished to a rich finish that makes them a joy to use.  The final step is fitting a fine, steel hooped hornbeam handle.

Many of our customers wish to upgrade to a professional, “serious” chisel.   Although other brands may claim this status, few can compare to the quality and edge retention capabilities of our Two Cherries German-made chisels.

6mm, 10mm, 12mm, 16mm, 20mm, 26mm sizes (1/4″ through 1″).

TC w box.jpg (32448 bytes)


6 pc. Boxed Chisel Set


Add to Cart


4 pc special.jpg (14959 bytes) Two Cherries Boxed Special Chisel Sets

Two Cherries has introduced these special sets for woodworkers looking for the best tools at an affordable price.  These chisels are forged from the same quality German steel as our standard tools and represent European tool making at its best.  The blades are finely ground but left unpolished. The difference is cosmetic, and in no way compromises the quality and utility of these chisels, while allowing us to offer these sets at a substantial savings.

4 piece set sizes include: 10mm (3/8″), 16mm (5/8″), 20mm (3/4″) and 26mm (1″).  Packed in a nicely crafted hardwood box.

6 piece set sizes include: 6mm, 10mm, 12mm, 16mm, 20mm, 26mm. Packed in a nicely crafted hardwood box.

Stock # Description Price Purchase
500-9050 Special 4 pc. Set $135.95 Add to Cart
500-9060 Special 6 pc. Set $168.55 Add to Cart


TC Carving Kit.jpg (91261 bytes) Two Cherries Carving Sets

These are a great starter sets for the beginning carver.  The carving tools are a scaled down version of the Two Cherries full size tools (about 8″ overall length compared to the 10″ length of the full size tools) and are perfect for detail work and smaller carvings. The carving tools and knives in these sets are hand forged, top quality tools designed for a wide variety of carving projects.  The kits include a sharpening stone.

11 Pc. Set contents: 8mm straight chisel, 10mm skew chisel, 6mm medium gouge, 8mm medium gouge, 2mm veiner gouge, 6mm V tool, detail knife, short edge skew knife, double edge knife, bench knife, sharpening stone (30mm x 80mm). Comes packed in a fine wooden box.

7 Pc. Set contents: 8mm straight chisel, 6mm medium gouge, 6mm V tool, double edge knife, skew knife, detail knife and sharpening stone. Available packed in a fine wooden box, or without a box.


Stock # Description Price Purchase
515-3441 11pc. Carving Set (with wood box) $340.95 Add to Cart
515-3437 7pc. Carving Set (with wood box) $220.95 Add to Cart
515-3427 7pc. Carving Set (no box) $170.95 Add to Cart


Stubai 5 pc. Carving Knife Set

This set contains 5 essential knives for a variety of woodcarving projects. From chip carving to figure and character carving these knives will provide the user with the versatility and quality necessary for producing their best work. Made by Stubai of Austria.

Set includes (from left) skew detail, double edge, bench knife, long skew edge, stab knife.

Stock Number Description Price Purchase
512005 Stubai 5 pc Carving Knife Set $89.95 Add to Cart


Ten Piece Chip Knife Set

Our ten piece knife set contains all of the  tools essential for general carving and chip carving projects.  These Two Cherries Brand tools are hand forged from quality German steel then hardened and tempered to 61Rc (Rockwell scale.)  This means that these knives will take and hold the sharpest edge possible.  The blades are expertly shaped and ground and each knife is polished to a mirror finish.

Note:  Knives require honing before use.

515-3310 Ten Piece Knife Set $185.50 Add to Cart


Six Micro Set.jpg (37189 bytes) Two Cherries 6 pc. Micro Carving Set

Wilh. Schmitt Company, makers of Two Cherries edge tools, has introduced a selection of micro carving tools.  Like all other products made by this venerable manufacturer, these tools are hand forged and finely polished.  The blades are mounted on a special wooden handle designed to be comfortable and easy to use.  The blades are approximately 2 1/2″ long and handles are 4 1/2″.

6 pc. set includes: 1.5mm curved chisel, 1mm shallow gouge, 1mm medium gouge, .5mm deep gouge, 1mm deep gouge, 1.5mm V chisel.

Note:  Tools require honing before use.

Description Stock Number Price Purchase
    6 pc. Micro Carving Set 512-5406 $199.95 Add to Cart


Power Grip Carving Tool Set

The comfortably shaped handles allow the carver to use a variety of grips when carving. Ideal for relief carving as well as small detailed figure carving. The carbon steel blades are properly hardened to retain a keen edge and come honed razor sharp. A great set for beginners and experienced carvers. Overall tool length is 5 1/4″. Blade length is 1 1/4″. Made in Japan. Set of five (packed in a convenient storage box) contains these tools:1/8″ #10 gouge, 3/8″ #5 gouge, 1/4″ V parting tool, 5/16″ straight chisel, and 5/16″ skew chisel.
Description Stock Number Price Purchase

Power Grip Set

165-1005 $45.00

Add to Cart